Solutions

For lighter wood, traditional PET strapping can be used to reduce the cost of packing and the rate of loss of goods;
For heavier wood, you can use the Composite Strapping to ensure that the goods are tightly packed, and second, to ensure that the packing belt is not broken.

(1) For heavier small wooden boxes, you can try to press the upper wooden box on the gap between the two lower wooden boxes. This is a way of operating in the case of small gaps because of the weight of the upper wooden box The lower wooden box can be restricted from moving during transportation. But the top wooden box must be reinforced and firm. If the gap is large, it can not be loaded like this, and the gap needs to be filled with reinforcement products such as inflatable bags and wood.
(2) After the loading is completed, if the goods are still some distance away from the box door, the general customers will use wooden piles for reinforcement, but now there are better products: flexible packaging belts, as long as the X packaging mode can be very convenient Good, to prevent the impact of the goods on the rear door during transportation.

• Does not corrode or rust like steel so suitable for outdoor applications

• Used where safety is priority

• Suitable for strapping large loads or fragile products that may be damaged